Air-Intake-Direct.com

AFE MACHFORCE XP CAT-BACK EXHAUST
SYSTEM FEATURES:
• T-409 Stainless Steel, Natural Finish.
• Single rear side exit.
• Increases air flow by 150 percent.
• 3 in. main piping diameter, 3 in. tail pipe diameter.
• Provides additional power up to 26 h.p. and 30 lb.-ft. of torque.
• Single inlet and outlet muffler configuration.
• Includes pipes, muffler, hangers, band clamps, and single polished
stainless steel tip with round shape, angle cut, and rolled edge design.
• Manufactured in-house to the highest engineering standards for
performance and quality.
• Made from tough and durable T-409 stainless steel to ensure stock fit.
• Its 100 percent mandrel-bent tubing eliminates sharp bends, flat spots,
and wrinkles that inhibit air flow and rob horsepower and fuel economy.
• Produces optimum flow increase through its high flow muffler.
• Extensively dyno and flow bench-tested to provide maximum gains for
every vehicle.
• Has premium quality band clamps on its critical joints to provide the
tightest, leak-free seal.
• Easy clamp-on installation.

aFe exhaust systems are manufactured in-house to the highest engineering standards for performance and quality. All tubing is 100%mandrel-bent to provide the highest flow possible. Each system is extensively dyno and flow bench tested to provide maximum gains for every truck.

Features & Benefits
Bayonet hangers	Welded-on hangers	Band style clamps	Mandrel bent
Swaged bayonet ends lock your exhaust component into place for the most secure installation possible. Other manufacturers use less expensive bent hangers that allow tubes and parts to slide from side to side, causing premature wear and damage.	Every hanger is thoroughly welded on each side to ensure a stronger connection, compared to other manufacturers who use only inferior floating hangers.	Premium-quality band clamps are used on critical joints to provide the tightest, leak-free seal possible. Other systems use common, less expensive U-bolt clamps.	All aFe tubing is 100% mandrel-bent. Mandrel bending ensures the tubing maintains its shape and size, providing smooth, unrestricted airflow. Standard tubing can lose as much as 20% of its diameter in sharp bends.